+7(495)249-27-38
+7(925)771-01-62
Oce IJM 153 Smart Matt Paper, 180g
- Бренд:
- Oce
- Тип товара:
- Бумага
- Тип покрытия:
- Матовое
- Тип чернил:
- На основе красителя (Dye ink) / Пигментные (Pigment ink) / Латексные
- Плотность (gsm):
- 180
Цена за 1 шт
КоличествоProduct Description
Bright white matt pre-treated base coated with an inkjet-receptive layer on one side and a balance coating on the reverse side.
Physical Properties
| Weight | 180 ± 5 g/m2 | ISO 536 | Gloss | 5 maximum @ 60 | |
| Thickness | 190 ± 10 μm | ISO 534 | Smoothness | 90 nominal | Tappi T-538 |
| Whiteness | 97 ± 2 CIE | Ganz 82 | Opacity | Min 95 % | Tappi T-425 |
Applications/ Features
| Indoor signage (posters, points of purchase) | High ink load capacity (up to 300%) |
| For presentations and exhibitions | Easy to feed in and to laminate |
| Imposition proofing | No cockling |
| For high-quality CAD and GIS mapping |
Available Widths (mm)
| 2"Core: | 914 | 1067 | 1270 | 1524 | ||
| Refer to www.oce.com. | ||||||
Storage Conditions
Shelf life: 2 years
Temperature 10-30ºC Relative Humidity 20-70%
Repack opened rolls when not in use
Print Conditions
Best results are obtained between 15-25ºC and 40-60% RH.
Environment, Health & Safety
No Material Safety Data Sheet required.
Paper waste suitable for recycling in most countries. Please refer to local paper recycle station.
Printer Compatibility
| DG Printers | Ink | Rating | Remarks |
| Océ 5350300, 5350600 | Dye / Pigment | 3 / 3 | With dye ink accelerated fading of magenta might occur |
| Océ CS 5050/5070/5090 | Dye / Pigment | 3 / 3 | With dye ink accelerated fading of magenta might occur |
| Encad NJ ProE/500/630/700/850/1000i | Dye / Pigment | 3 / 3 | With dye ink accelerated fading of magenta might occur |
| HP 5000/5500 | Dye / Pigment | 3 / 3 | With dye ink accelerated fading of magenta might occur |
| Epson 7x00/9x00/10000 | Dye / Pigment | 3 / 3 | |
| Epson 7600/9600 | Ultrachrome | 3 | |
| Mutoh 4000/6000 | Dye / Pigment | 3 / 3 | |
| Canon 7200/8200 | Dye | 3 | |
| Roland Hifi Jet, Mimaki JV4, Kodak 3000 | Dye / Pigment | 3 / 3 | |
| Mimaki JV, RGI Bellise, Mutoh RJ, Agfa Sherpa | Dye / Pigment | 3 / 3 | |
| CAD Printers |
Rating
|
||
| Océ 5150 | 3 | Setting: other | |
| Océ 5200 | 3 | Minor banding | |
| HP 750C, 500/800, 1050, | 3 | ||
| 3= excellent 2= fair 1= not recommended | |||
Lamination Compatibility
| Cold | Warm | Hot |
| 3 | 3 | - |
| 3= excellent 2= fair 1= not recommended | ||
Cold: pressure sensitive
Warm: heat activated: 85ºC - 95ºC
Hot, heat activated 105º C -130º C
Outdoor Use
Outdoor use of this paper without protection is not recommended.
Colour Profiles
Océ develops high-quality colour profiles for media / ink / printer / RIP combinations. Check availability of profiles for your printer on the download section of www.oce.com.
Processing Guidelines
Printing guidelines
Allow material to adapt to room conditions for 24 hours before
printing.
Use gloves when handling rolls.
Always print on the outside of roll.
To insure best print performance check the print cartridges
daily.
The product accepts upto 300% ink loads.
Increased ink loads will increase dry time.
The use of dye inks (e.g. Océ GC, Encad GX ) can lead to premature fading of magenta.
Application guidelines
The product is not designed for outdoor applications.
However, it may be used for outdoor signage if encapsulated on all sides.
Lamination guidelines
Allow adequate drying before laminating.
Excellent reverse side adhesion for mounting and encapsulation applications.
Encapsulation is recommended.
One-sided lamination may cause curl.
- Комментарии
- Вконтакте